Specifications

4 Communication settings and guide of HMI connecting with controller
PLC Setting
1. Set modbus RTU in the SLP-D10, and then download.
2. Station match with the switch on the device.
◎Supported Device
DCP30
Device
Bit Address
Word Address（Parameter code）
Format
Notes
RUN Status ------ 1-26 DDD
PARA ------ 1-33
DDD
EU ------ 1-13
DDD
PID
------
1-80
DDD
SET ------ 1-99 DDD
TBL
------
1-22
DDD
CNST ------ 1-26 DDD
FO_R 1-19 ------ DDD
FO_W 1-19 ------ DDD
FC 1-19 ------ DDD
FD 1-19 ------ DDD
FBR1_R ------ 1.0-30.22 DDD.DD
- 351 -