Specifications

4 Communication settings and guide of HMI connecting with controller
3 RXD
2 TXD
1 GND
PLC Auxiliary
interfaceJST 4PIN
JST 4PIN
com2
3 TX
2 RX
5 GND
8 TX
7 RX
5 GND
com0/com1
HMI terminal
9pin D-SUB female/male
4.80 XiLin Inverter
◎Serial Communication
Series CPU Link Module Driver
XiLin EH600 RS485-2 on the CPU unit XiLin EH600
◎System configuration
Series CPU Link Module COM Type Parameter Cable
XiLin
EH600
RS485-2 on the CPU unit RS485-2 Setting Your owner cable
◎Communication Setting
HMI Setting
Default Communication: 9600, 8, even, 1; station: 1
◎Supported Device
Device
Bit Address
Word Address
Format
Notes
Addr communication parameter ------ Addr HHHH
A FWD ------ A 0 D
B REV ------ B 0 D
- 348 -