Specifications

4 Communication settings and guide of HMI connecting with controller
PLC Setting
Please refer to the communication equipment related documentation to set the parameter.
BACnet IP protocol
HMI Setting
NOTE：
Label one, Station No: Range(0~255),Setting in PLC;
Label two, PLC IP Address: Just in the same segment;
Label three, Users can modify:
8000 stands for HMI’s ID number,16 stands for register read and writer priority, range
（
1~16
）
;
PLC Setting
Please refer to the communication equipment related documentation to set the parameter.
◎Supported Device
BACnet MS/TP Protocol
Device Bit Address Word Address Format Notes
Binary Input
BI 0-65535
------ DDDDD
Binary Output
BO 0-65535
------ DDDDD
Binary Value
BV 0-65535
------ DDDDD
- 32 -