Specifications

4 Communication settings and guide of HMI connecting with controller
PLC Setting
1. In the hardware configuration, insert CP400 Ethernet module CP443-1：
2. Open the Properties of CP443-1, set the IP address. No need to set MAC address.
3. Download after finishing hardware configuration
◎Supported Device
S7-200
Device
Bit Address
Word Address
Format
SCR
S.B 0.0-31.7
------
DDD.O
Special memory Relay
SM.B 0.0-549.7
------
DDDD.O
Counter Relay
Cnt 0-255
------
DDD.O
Timer Relay
Tim 0-255
------
DDD.O
- 315 -