Specifications

4 Communication settings and guide of HMI connecting with controller
3. Specifying IP address
3.0 Define an IP address for the CP 243-1.
Caution:The IP address for this application may not be taken automatically from a server because the
panel requires a fixed reference partner (CP 243-1) for the Ethernet communication.
Note: The communication connection type for this module can be defined by the “Automatic Setting”.
4.0 Click on “Next” to continue.
4. Parameterizing PtP connection
5.0 Specify the command byte for the module and the number of point-to-point connections with the
CP 243-1 .
6.0 Click on “Next”.
- 306 -