Specifications

4 Communication settings and guide of HMI connecting with controller
◎Supported Device
Device Bit Address Word Address Format Notes
Direct I/O Input LW.B8500.0~8615.F ———— DDDD.H
Direct I/O Output LW.B8000.0~8115.F ———— DDDD.H
Direct I/O Input ———— LW8500~8615 DDDD correspond PIW
Direct I/O Output ———— LW8000~8115 DDDD correspond PQW
Direct I/O Input ————
LW8500~8615(Data
width is dword)
DDDD correspond PID
Direct I/O Output ————
LW8000~8115(Data
width is dword)
DDDD correspond PQD
NOTE: When use either PID or PQD, you must set User_Prm_Data (0) =1 if HMI communication with the
DP port of Siemens; Other company devices which support PROFIBUS DP Master, default
User_Prm_Data (0) =0.
◎Cable Diagram
A-type violet cable
4.62 RF-IC (Card Reader)
◎Serial Communication
- 276 -