Specifications

4 Communication settings and guide of HMI connecting with controller
4.57 Panasonic Electric Corporation
◎Serial Communication
Series CPU Link Module Driver
FP
FP
Σ
Tool port on the Control unit
Panasonic FP
AFPG801
AFPG802
AFPG803
AFPG806
FP0
FP1
FP-M
Tool port on the Control unit
RS232C port on the Control unit
FP2
FP2SH
Tool port on the Control unit
RS232C port on the Control unit
AFP2462
AFP2465+(AFP2803,AFP2804, FP2805)
FP3
Tool port on the Control unit
AFP3462
FP-e Tool port on the Control unit
AFPE224300
AFPE224302
AFPE224305
AFPE214322
AFPE214325
FP10SH
FP10S
Tool port on the Control unit
RS232C port on the Control unit
AFP3462
FP-X
RS232C port on the Control unit
◎System configuration
Series
CPU
Link Module
COMM Type
Parameter
Cable
FP
FP

Tool port on the Control unit
RS232C Setting
Your owner cable
AFPG801
Your owner cable
AFPG802
AFPG806
AFPG803
RS485(2 wire)
Setting Your owner cable
AFPG806
FP0
Tool port on the Control unit
RS232C Setting
Your owner cable
RS232C port on the Control unit
Your owner cable
FP1
FP-M
Tool port on the Control unit
RS232C Setting
Your owner cable
RS232C port on the Control unit Your owner cable
FP2 Tool port on the Control unit RS232C Setting Your owner cable
- 258 -