Specifications

4 Communication settings and guide of HMI connecting with controller
◎Communication Setting
Default communication: 9600, 7, even, 2; station: 0
◎Supported Device
OMRON E5EZ-R3
Device Bit Address Word Address Format Notes
Variable ------ 0.0 — 0.A (C0 read only) DDD.HH Main addr indicates variable
type 0(C0),1(C1),2(C3)
subaddress indicates address
of variable type
1.0 — 1.2D (C1)
2.0 — 2.5B (C3)
Action Command ------
0-8
H
State 0-31 ------ DD Show the bit value of 0001
（state）in C0
Abnormal Input 0 ------ D The 6th value of C0
0001(state) Abnormal Input
NOTE: H indicates hexadecimal
Action Command address and other informations
Addr command content Notes
0 Communication write
00:OFF（disable）
Before writing data, "Communication
write" command is "01” ON (enable)",
otherwise it writes disable
01:ON （enable）
1 Run/Stop
00：Run
01：Stop
2 Multi-segment SP
00
：
Setting value 0
Must set the value of variable(addr:3.1A )to
1(ON) for writing correctly, otherwise it
can’t write-in.
01
：
Setting value 1
02
：
Setting value 2
03：Setting value 3
- 254 -