Specifications

4 Communication settings and guide of HMI connecting with controller
◎Serial Communication Setting
OMRON CP Series Host Link protocol
HMI Setting
Default communication: 9600, 7, even, 2; station: 0
RS232 communication
RS422 communication
NOTE
：Make sure that the switch DIP1~6 of PLC must be OFF when using OMRON CP Series Host Link
protocol.
NO. Setup contents default status
1
ON: write enable
OFF:write disable
OFF
2
ON: program automaticlly transmit from card to PLC when power up
OFF: program can’t automaticlly transmit from card to PLC when power up
OFF
3 OFF: OFF(default) OFF
4
ON: communication port1,Toolbus(default)
OFF:Port 1 communications settings according to the PLC system CPU setting
OFF
- 240 -