Specifications

4 Communication settings and guide of HMI connecting with controller
HMI Setting
Default parameters :115200, 8, odd, 1 ; Station No. : 0(Non-support station number, only one HMI connect
to one PLC)
RS232 communication
NOTE: If communication baudrate is error, HMI automatically set PLC baudrate for the HMI baudrate. It
is not necessary to consider whether the PLC communications baudrate being true.
Mitsubishi Q_QnA (Link Port) & Mitsubishi Melsec Q protocol
HMI Setting
Default parameters :9600, 8, odd, 1 ; Station No. : 0
RS232 communication
RS422 communication
- 202 -