Specifications

4 Communication settings and guide of HMI connecting with controller
Mitsubishi Q00J (CPU Port) protocol
HMI Setting
Default parameters: 19200, 8, odd, 1; Station No.: 0(Non-support station number, only one HMI connect to
one PLC)
RS232 communication
NOTE
：
1、 If communication baudrate is error, HMI automatically set PLC baudrate for the HMI baudrate. It
is not necessary to consider whether the PLC communications baudrate being true.
2、 This drives support password protection model Q00J.
Mitsubishi Q series (CPU Port) protocol
HMI Setting
Default parameters :115200, 8, odd, 1 ; Station No. : 0(Non-support station number, only one HMI connect
to one PLC)
RS232 communication
NOTE: If communication baudrate is error, HMI automatically set PLC baudrate for the HMI baudrate. It
is not necessary to consider whether the PLC communications baudrate being true.
Mitsubishi Q06H 、Mitsubishi Q06Hv2 protocol
- 201 -