Specifications

4 Communication settings and guide of HMI connecting with controller
NOTE: 1. *
1
The protocol support multi-station
2. *
2
The protocol don’t support multi-station
3. *
3
□□means the module that is suitable for the PLC
4. *
4
The protocol support to modify the device points, only to support Q06HCPU and
Q02HCPU.
◎Network Communication (Direct online simulation disable)
Series CPU Link Module Driver
FXCPU
FX3GE-24M Ethernet port on CPU unit
Mitsubishi FX Series Ethernet(TCP
Slave)
FX3U-32M FX3U-ENET-L
QCPU
Q00CPU
Q00JCPU
Q01CPU
Q02CPU
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
Q03UDECPU
Q04UDEHCPU
Q06UDEHCPU
Q13UDEHCPU
Q26UDEHCPU
QJ71E71
QJ71E71-B2
QJ71E71-B5
QJ71E71-100
Mitsubishi QJ71E71 EtherNet Slave
Q02UCPU
Q03UDCPU
Q04UDHCPU
Q06UDHCPU
Q13UDHCPU
Q26UDHCPU
QJ71E71
QJ71E71-B2
QJ71E71-B5
QJ71E71-100
LCPU
L02CPU
L26CPU-BT
Ethernet port on CPU unit
Mitsubishi QnA 3EBin Ethernet(TCP
Slave)
QCPU
Q03UDECPU
Q26UDV CPU
Ethernet port on CPU unit
◎Serial System configuration
Series CPU Link Module
COMM
Type
Parameter Cable
FXCPU
FX1S
FX0N
RS485 on the CPU unit
FX□□-422-BD
RS232
Setting
Your owner cable
RS485-4 Setting Your owner cable
FX□□-485-BD
FX
□□
-485-ADP
RS485-4 Setting Your owner cable
FX1N
FX1NC
FX2N
RS485 on the CPU unit
FX□□-422-BD
RS232
Setting Your owner cable
RS485-4
Setting
Your owner cable
FX□□-485-BD
RS485-4 Setting Your owner cable
- 195 -