Specifications

4 Communication settings and guide of HMI connecting with controller
e.g. ：3X_BIT1.0~~1.15--------------------PQW256（binary）
PLC software setting
Setup the GSD in the S7-300 software
Procedure ：
（1）.Close all stations in “HW Config”.
（2）.And select “option”-->”setup GSD”.
（3）. In the “installation *.GSD file” dialog box, select Source: folders contain *. GSD file, or the
STEP 7 project contain *. GSD file
（4）.Select one or more files from *.GSD file list, and then click on "install" button.
Copy the icon (. BMP file) to the relevant path, such as BRIDGE product：Bitmap_Device =
"EVIEW", that copy the "EVIEW" BMP file to the relevant path: c:\siemens\step7\s7data\nsbmp or
c:\siemens\cpbv51\bitmaps
After installation, you can find the appropriate symbol in "PROFIBUS DP\GAT WAY".
Project configuration
（1）Use the guide to set up projects in the s7-300 software.
（2）Double click “DP” of "HW Config"->attribute->new
（3）After press “ok”, and then give a connection as follows：
- 136 -