Operation Manual

en
26
Switching on
the appliance
Switch on the appliance with the On/Off
button. Fig. 1/1
The appliance begins to cool. Light is
switched on when the door is open.
The factory has recommended
the following temperatures:
■ Refrigerator compartment: +4 °C
■ Freezer compartment: –18 °C
Operating tips
■ When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
■ The fully automatic No Frost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
■ The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
■ If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Setting the temperature
Turn temperature controller, Fig. 1/5, to
the required setting.
When the controller is at a medium
setting, the temperature drops
to approx. +4 °C in the coldest zone.
Fig. 1/5
Higher settings lower the temperature in
the refrigerator compartment.
We recommend:
■ Perishable food should not be stored
above +4 °C.
■ Low setting for short-term
storage of food (energy-saving mode).
■ Medium setting for long-term storage
of food.
■ Select a higher setting only
temporarily, when the door is
frequently opened or large quantities
are placed in the refrigerator
compartment.
Freezer compartment
The temperature can be set from –16 °C
to –24 °C.
Keep pressing temperature selection
button 2 until the required freezer
compartment temperature is set. The
value last selected is stored.
The set temperature is indicated on
display 3.
We recommend a factory setting of –18
°C in the freezer compartment.