User Manual
Table Of Contents
- SIMATIC ITP1000
- Warning notice system
- Preface
- Table of contents
- 1 Overview
- 2 Safety notes
- 3 Commissioning the device
- 4 Devise functions and operating the device
- 5 Device maintenance and repair
- 6 Technical specifications
- A Technical Support
- B Labels and symbols
- C Abbreviations
- Index
Technical specifications
6.6 BIOS description
SIMATIC ITP1000
Operating Instructions, 01/2017, A5E37340160-AA
83
6.6.6
Default BIOS Setup entries
Documenting your device configuration
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
Note
Print out the table below and keep the pages in a safe place once you have mad
e your
entries.
Main
System parameters
Defaults
Custom entries
System Time
hh:mm:sss
System Date
MM/TT/JJJJ
Advanced
System parameters
Defaults
Custom entries
HPET- HPET Support
Enabled
Advanced > Boot Configuration
System parameters
Defaults
Custom entries
NumLock
On
POST Errors
All without keyboard
Advanced > Peripheral Configuration
System parameters
Defaults
Custom entries
Internal COM 1
Enabled
Onboard Ethernet 1
Enabled
Onboard Ethernet 1 Address
00:1B:1B:41:42:7B (example)
WLAN
Last State
Audio
Enabled
SD-Card
Enabled
USB-C: Left side
Enabled
USB-A: Top side right
Enabled
USB-A: Top side left
Enabled
Camera
Enabled
Barcode Imager Enabled
RFID
Enabled