User Manual
Table Of Contents
- SIMATIC ITP1000
- Warning notice system
- Preface
- Table of contents
- 1 Overview
- 2 Safety notes
- 3 Commissioning the device
- 4 Devise functions and operating the device
- 5 Device maintenance and repair
- 6 Technical specifications
- A Technical Support
- B Labels and symbols
- C Abbreviations
- Index
Technical specifications
6.6 BIOS description
SIMATIC ITP1000
Operating Instructions, 01/2017, A5E37340160-AA
81
6.6.4
Structure of the BIOS Setup menu
The individual setup parameters are distributed between different menus and submenus. Not
all menus are included in each supplied device configuration. The following table shows the
menus.
Menu
Meaning
Main
Display system information, for example, BIOS version, processor and memory
Advanced Configure hardware using different submenus
Security
Security functions, e.g., setting a password
Power
Specify CPU settings and switch-on functions.
Boot
Determine boot options, e.g., boot order
Exit
Save and exit (see Exit menu)
The menus always have the same structure. The figure below shows an example for the
"Main" menu. Device-specific information is shown blurred.
①
Header
The current version of the selected BIOS Setup is di
s-
played in the header.
②
Menu bar
Switch between the various menus "Main",
"Advanced",
etc. in the menu bar at the top.
③
Settings, submenus and
device
-specific information
Information about your device is displayed in the center
left
-
hand area; here you can edit settings which are partly
in submenus.