User Manual
Table Of Contents
- SIMATIC ITP1000
- Warning notice system
- Preface
- Table of contents
- 1 Overview
- 2 Safety notes
- 3 Commissioning the device
- 4 Devise functions and operating the device
- 5 Device maintenance and repair
- 6 Technical specifications
- A Technical Support
- B Labels and symbols
- C Abbreviations
- Index
Technical specifications
6.6 BIOS description
SIMATIC ITP1000
80 Operating Instructions, 01/2017, A5E37340160-AA
The following keys are available in the BIOS selection menu:
Buttons
Function
Continue
Exit selection menu, continue start sequence
Boot Manager Specify the boot media from which to boot:
• Hard disk drive
• USB drive (USB boot = enabled)
Device Management
Start device manager for UEFI boot media
Boot From File Boot Maintenance Manager:
• Boot Options: Set boot order
• Driver Options: Configure drivers
• Console Options: Configure connected input device
• Boot from File: Start from an ".EFI" file
• Reset System: Restoring factory settings
Secure Boot Option
1
Configuration settings to start the device in Secure Boot mode. The only
software modules loaded are those that are known to be safe for the
BIOS or the operating system.
SCU
Start BIOS Setup via Setup Configuration Utility
BIOS Update
Update BIOS from USB flash drive
MEBx
Intel Management Engine AMT configuration
1
Available as of Windows 8 or later