User Manual

Device maintenance and repair
5.4 Reinstalling the software
SIMATIC ITP1000
Operating Instructions, 01/2017, A5E37340160-AA
57
5. Select the USB stick in the Boot Manager and confirm your entry.
– To restore a system which boots in "UEFI" mode, you must also boot the supplied
Restore USB stick using UEFI.
– To boot the Restore USB stick in "UEFI" mode, select the corresponding entry in the
Boot Manager.
– To restore a system which boots in "Legacy" mode, you must also boot the Restore
USB stick using Legacy.
– To boot the Recovery functionality in "Legacy" mode, select the corresponding entry in
the Boot Manager.
6. Select the function "Restore" and confirm your selection.
7. Follow the instructions on the screen.
Note
In delivery state, Windows 7 boots in "UEFI" mode.
In delivery state, Windows 10 (available in a later delivery stage) boots in "UEFI" mode.
5.4.4
Updating the operating system
Windows
The latest updates for the Windows operating system are available on the Internet at
Microsoft (http://www.microsoft.com/en-us) and on the device in the Start menu "Start > All
Programs > Windows Update > Check for updates".
Note
Before you install new drivers or operating system updates for Windows MUI versions,
configure the regional menu and dialog settings and the
default English (US) language.
other operating systems
Contact the corresponding manufacturer.