User Manual
Table Of Contents
- SIMATIC ITP1000
- Warning notice system
- Preface
- Table of contents
- 1 Overview
- 2 Safety notes
- 3 Commissioning the device
- 4 Devise functions and operating the device
- 5 Device maintenance and repair
- 6 Technical specifications
- A Technical Support
- B Labels and symbols
- C Abbreviations
- Index
Device maintenance and repair
5.3 Installing and removing hardware
SIMATIC ITP1000
Operating Instructions, 01/2017, A5E37340160-AA
51
3. Open the battery cover by folding back from edge of device toward middle of device and
place the battery cover with the attached battery on a flat surface.
4. Remove the two battery screws
② and store these separately from the two previously
removed screws
①.
5. Fasten the new battery with the two battery screws
②.
6. Insert the new battery, as illustrated, obliquely from above
③ and then fold it downward
④.
7. Close the battery cover and fasten it with the two remaining screws
①.