User Manual
Table Of Contents
- SIMATIC ITP1000
- Warning notice system
- Preface
- Table of contents
- 1 Overview
- 2 Safety notes
- 3 Commissioning the device
- 4 Devise functions and operating the device
- 5 Device maintenance and repair
- 6 Technical specifications
- A Technical Support
- B Labels and symbols
- C Abbreviations
- Index
Device maintenance and repair
5.2 Replacement interval
SIMATIC ITP1000
50 Operating Instructions, 01/2017, A5E37340160-AA
5.2
Replacement interval
To maintain high system availability, we recommend the preventative replacement of those
PC components that are subject to wear in accordance with the intervals for replacement
indicated in the table below:
Component
Replacement interval
SSD
3 years
Backup battery 5 years
5.3
Installing and removing hardware
5.3.1
Replacing rechargeable battery
WARNING
Observe the danger notices
Read the notes and information on the proper use and correct disposal of batteries in
section "Notes on battery operation (Page 28)".
Requirement
The device is completely isolated from the line voltage.
Torx 8 screwdriver
An original replacement part, refer to section "Accessories (Page 19)".
Procedure
1. Turn the device over so that it is lying on a flat surface.
2. Remove the two screws
① on the underside of the device and store these safely.