User Manual

Safety notes
2.4 Notes about usage
SIMATIC ITP1000
Operating Instructions, 01/2017, A5E37340160-AA
25
Transport
Despite the fact that the device is of a rugged design, its internal components are sensitive
to severe vibrations or shock. With just a few simple transport precautions you can help to
create a trouble-free operation.
● Switch off the device (see section On/off button (Page 15)).
● Disconnect the peripheral devices from the device.
You should always use the
original packaging
for shipping and transporting the device.
NOTICE
Risk of damage to the device!
If you are transporting the device in extreme weather conditions with large fluctuations in
temperature, care must be taken to ensure that no moisture forms on or in the device
(condensation).
If condensation develops, wait at least 12 hours before switching on the device.
2.4
Notes about usage
NOTICE
Possible restricted functions in case of non-validated function of the plant.
The device is tested and certified based on the technical standards. In some cases function
restrictions can occur during the operation of your plant.
To avoid restrictions, validate the correct function of the plant.
Note
Ventilation of the device
The device is cooled through several ventilation slots: Ensure that these ventilation slots are
not covered or closed during operation.
Note
Requirements for base on which device is operated
Avoid
any damage to the device from scratching or overheating.
Only place the device on a flat, even, clean and hard base.