User Manual

Safety notes
2.2 Safety note on barcode reader and RFID reader
SIMATIC ITP1000
24 Operating Instructions, 01/2017, A5E37340160-AA
2.2
Safety note on barcode reader and RFID reader
The barcode reader and RFID reader used are open systems that are freely configurable.
Various options are available to increase industrial security. For more information on this,
please contact SIEMENS Customized Automation (hhttp://w3.siemens.com/mcms/human-
machine-interface/en/customized-products/Pages/Default.aspx).
2.3
Safety guidelines for transport
Before you set off
Observe the following information when you are traveling with the device:
● Save important data from the SSD drive.
● For safety reasons, switch off the radio component (WLAN) if you cannot be sure that the
transmitted radio waves will not interfere with any electrical or electronic equipment in
your vicinity.
● If you want to use your device during a flight, first of all ask the airline company if you are
permitted to do so.
● When traveling abroad, ensure the power adapter can be used with the local mains
voltage. If this is not the case, you must acquire the appropriate adapter for your device.
Do not use any other voltage transformers!
Note
Using the device in different countries
Verify the compatibility of local mains and power cable specifications are compatible
when using
the PG abroad. If this is not the case, purchase a power cable that complies
with the local conditions. Do not use connection adapters for electrical appliances in order
to connect the device to them.