User Manual
Table Of Contents
- SIMATIC ITP1000
- Warning notice system
- Preface
- Table of contents
- 1 Overview
- 2 Safety notes
- 3 Commissioning the device
- 4 Devise functions and operating the device
- 5 Device maintenance and repair
- 6 Technical specifications
- A Technical Support
- B Labels and symbols
- C Abbreviations
- Index
Safety notes
2.1 General safety instructions
SIMATIC ITP1000
Operating Instructions, 01/2017, A5E37340160-AA
21
Repairs
WARNING
Damage to property and personal injury
Only qualified personnel are permitted to repair the device.
Unauthorized opening and improper repairs can cause considerable damage to property or
danger for the user.
System expansions
CAUTION
Risk of damage to the system or the plant
The installation of expansions that are not intended for this device can damage the system
and violate the radio-interference suppression regulations.
Only install system expansion devices designed for this device.
Contact your technical support team or where you purchased your PC to find out which
system expansion devices may safely be installed.
NOTICE
Warranty
If you install or exchange system expansions and damage your device, the warranty
becomes void.
Battery
This device is equipped with a lithium battery for supplying power to the internal real-time
clock. Batteries may only be replaced by qualified personnel.
CAUTION
Risk of explosion when replacing and disposing of the battery
There is the risk of an explosion if the battery is not replaced as directed. Replace only with
the same type or with an equivalent type recommended by the manufacturer. When
disposing of batteries, observe the locally applicable legal regulations.
WARNING
Risk of explosion and release of harmful substances!
Do not throw lithium batteries into an open fire, do not solder, or open the cell body, do not
short-circuit, or reverse polarity, do not heat up above 100 °C, follow the disposal
instructions, and protect against direct exposure to sunlight, humidity, and condensation.










