User Manual
Table Of Contents
- SIMATIC ITP1000
- Warning notice system
- Preface
- Table of contents
- 1 Overview
- 2 Safety notes
- 3 Commissioning the device
- 4 Devise functions and operating the device
- 5 Device maintenance and repair
- 6 Technical specifications
- A Technical Support
- B Labels and symbols
- C Abbreviations
- Index
Overview
1.2 Design of the device
SIMATIC ITP1000
Operating Instructions, 01/2017, A5E37340160-AA
15
1.2.2
Operator controls
1.2.2.1
On/off button
The on-off button is located on the front of the device, see section "Front (Page 11)".
The on/off button (power) has the following functions:
● Switch device on/off (hold the button down for approximately 1 second; the response
depends on the Windows power option settings)
● Switch device off in the event of a fault (hold down for more than 5 seconds)
1.2.2.2
Buttons
The keys are located on the front of the device, see section "Front (Page 11)".
HOME key
● Opens the Windows Start menu
● <Home-Key> + <On-Off-Key>:
Opens the logon mask; corresponds to the shortcut "<Ctrl> + <Alt> + <Del>" for PCs
Locking key
● locks the display from inadvertent operation: Unlock by pressing the Locking key again
● Display is dimmed, no input and no display are possible
Function keys
● freely configurable with the SIMATIC IPC Configuration Center
● SIMATIC IPC Configuration Center is pre-installed in delivery condition.
● For more information, refer to SIMATIC IPC Configuration Center in section "Configuring
the device (Page 40)".