Specifications

CP143 H1 / TCP/IP manual Software
Rev. 00/07 5-11
5.5.3.3 Data base ↔
↔↔
↔ CP
The remote functions provide the different functions required for remotely controlling the CP
module (start, stop and delete), to request the status from the CP and to transfer data base files into
the CP.
Please make sure that you have specified the online transfer parameters in the section Online (see
chapter 5.6.2).
Fig. 5-4: Window for remote configuration
Remote control of the CP
Switch the RUN/STOP switch on your CP module to RUN. The status display is does not
change automatically when a change of status occurs.
[Stop the CP]
The status of the CP module is changed from RUN to STOP.
[Start the CP]
The status of the CP module is changed from STOP to RUN.
[Delete the CP]
The base file in the CP is deleted. You must first execute a STOP, otherwise the delete
command will be ignored.
CP-status
This output field contains the CP-status. This defaults to the "CP-status not up to date".
Click on [Status] if you wish to display the current status. The displayed status is brought up
to date.