Manualshelf

Specifications

ManualsBrandsSiemens ManualsHome building and DecorIP-Module
81828384858687888990
Installing and starting the program CP143 H1 / TCP/IP manual
5-2 Rev. 00/07
5.2 Installing and starting the program
The following files are located on the disk supplied with the package:
NCS.EXE This is the executable configuration program.
NCS.TXT Except for the help text, this file contains all the documentation of
the configuration program.
NCS.HLP This is the help system.
NCS.BIB A library containing programming algorithms for EPROMs.
RUNNCS.BAT Sample Siemens EPROM driver installation.
TCPEVAL.EXE Test program for TCP/IP connections.
(only for Windows 95 and Windows NT)
You may install this software under MS-DOS or under one of the graphic user interfaces.
The following sequence is required for an MS-DOS installation:
• Change to your hard disk
C:\
• Create a directory for the programs on your hard disk.
md NCS
• Copy all files from the diskette into this directory:
COPY A:\*.* c:\NCS
• Add the following statement to your path if you require access to the NCS-software from
different subdirectories.
PATH=...C:\NCS
• Install the TCP/IP drivers if you are using a CP1413 TCP/IP adapter.
To execute the software on a PG7xx you must also install the EPROM driver and the EPROM
programmer. Chapter 5.5.3.2 describes the installation of the driver.
You can now run the program under MS-DOS.
At this stage it is possible to install the program for another user interface or another operating
system. Please refer to the respective user manual for instructions on how to install an executable
program.
To start the program under MS-DOS you can simply type NCS. The English version is started by
entering NCS -e.
Other user interfaces or operating systems usually require a double-click on the icon to start the
program. The parameters for starting the program (-e) should be entered into the field "Command
line" which is located under "Properties". Once the program has started it displays a start window
containing the version number of the software and other data.
Press a key on the keyboard and you will be presented with the main menu.