Specifications

Error messages from the NCS configuration program CP143 H1 / TCP/IP manual
B-4 Rev. 00/07
Database file functions:
Module handler syspar eror
An error in the syspar area occurred when reading from or writing to the database file. This
error can occur only when you load a file that is not a database file. It is also not possible to
load database files that were created with version 1.00 of NCS.
Module handler boot error
An error occurred in the boot module when reading from or writing to the database file. This
error should not occur. Please inform us if you should encounter this type of error.
Module handler initalization error
An error occurred during the initialization of the module handler. This error should not
occur. Please inform us if you should encounter this type of error.
Module handler erase error
An error occurred when when erasing by means of the module handler. This error should not
occur. Please inform us if you should encounter this type of error.
Module handler file error
An error occurred when writing to or reading from the database by means of the module
handler. Check your drive. If necessary you should use an analyzer tool.
Module handler undefined error
This error should not occur. Please inform us if you should encounter this type of error.