Specifications

Error messages from the NCS configuration program CP143 H1 / TCP/IP manual
B-2 Rev. 00/07
Connection configuration error:
SSNR/ANR already assigned
The entered combination of SSNR/ANR exists.
Invalid task number (valid range 1..199)
The task number (ANR) must be a number between 1-199 (please note any reserved ANRs).
No task number was specified
Every connection must be associated with a task number.
The tile offset was omitted
Each connection must have a tile offset.
No priority specified
Each connection must have a priority.
Multiple connection n, SSNR/ANR already assigned
The specified combination of SSNR/ANR in a multiple connection has already been
specified.
Multiple connecion n, invalid task number (1..199)
The task number (ANR) for the multiple connection exists.
Multiple connection n, the tile offset was omitted
Every multiple connection must be associated with a tile offset.
Multiple connection n, no priority specified
Every multiple connection must have a priority.
Invalid tile base (valid range 0...252)
The tile base for the basic initialization is not valid.
No tile base specified
You did not specify a tile base address for the basic initialization.
This task type does not allow multiple connections
Multiple connections are only possible for a SEND or RECEIVE type connection.
Multiple connections only possible with Prio 1,2
You may only enter a multiple connection for Prio 1 or 2.
The specified task type is not suitable
The type of the multiple task must differ from that of the main task.