Specifications

CP143 H1 / TCP/IP manual Error messages from the NCS configuration program
Rev. 00/07 B-1
B Error messages from the NCS configuration program
General errors:
Nullpointer detected
An internal error has occurred during the transfer of parameters. Please contact us with the
respective details.
Insufficient memory
DOS main memory is full, remove all unneccessary programs from main memory.
Message administration
The message file could not be found. The file "ncs.txt" is not available.
No message available
This error occurs when a text message is not available. Please contact us with the respective
details.
Message file read error
An error occurred when a text message was read. Please check for errors in the file "ncs.txt".
If necessary you should use an analyser tool.
Disk drive errors:
Access denied
Access to the respective file was refused. Please check whether you have access rights for
the file.
Too many files, use a file filter
A directory contains too many files.
Drive not available
The specified drive was not available.
Drive is write protected
The specified drive is write protected.
File write error
Use an analyser to check the condition of your drive.