Specifications

Example CP143 H1 / TCP/IP manual
6-28 Rev. 00/07
Re: 2. Check transport parameters
Normally, transport parameters do not require changing. The dialogue window is displayed so that
the IP transport parameters may be checked.. Please note, that the transport parameters for all
stations are the same.
Fig. 6-19: Transport parameters of station 1 and station 2
Re: 3. Configure the connection
Station 1
This example is concerned with the respective TCP connections. Select TCP-Verbindung (H1-
transport connection) from the menu item Verbindungen (Connections). This will display the
window for TCP connections. Enter the following data for station 1:
• Connection name: SEND to station 2
• Job number: 11
• Priority: 2
• Type of job: SEND
• Port local station: 00100
• Port remote station: 00200
• IP-Adr. remote St.: Enter the IP address of station 2.
Fig. 6-20: TCP connection parameters station 1