Specifications

Application in combination with TCP/IP CP143 H1 / TCP/IP manual
5-70 Rev. 00/07
5.11.6 Test program for TCP/IP-Connections
The name of the test program is TCPEVAL.EXE. This program is only compatible with Windows
95.
You may use so-called PING-applications for tests under Windows 3.x. These applications can be used
to send a PING to a host computer and this will answer if the installation is OK.
Start the test program for Win 95:
Insert the supplied diskette (SSN-SW893, Disk 1) into drive A:.
Go to the START-menu and select RUN.
Enter the following: A:\TCPEVAL andclickon<OK>.
The test program starts and displays the following window:
Fig. 5-31: Test program "Connect"
The menu has the form of pages in a file. You can bring any page to the foreground by clicking on
the tab with the left mouse key.
File tabs
Connect Contains the status indicators for the connection and your own IP-
address.
ReadA Configuration of a READ AKTIV-connection (FETCH).
WriteA Configuration of a WRITE AKTIV-connection.
Receive Configuration of a RECEIVE-job.
Send Configuration of a SEND-job.
System Control window for requesting the status and to change RUN/STOP on
the CP.