Specifications

CP143 H1 / TCP/IP manual Software
Rev. 00/07 5-69
5.11.5 Microsoft kernel for TCP/IP under WINDOWS 95/NT
5.11.5.1 General
When NCS is to be used in conjunction with TCP/IP under Windows 95 or Windows NT it is
necessary to install the TCP/IP-Kernel supplied by Microsoft.
These paragraphs describe the installation of the Microsoft kernel for Windows 95 or Windows NT
V4.0.
5.11.5.2 Installation
From the START menu click on Settings and Control panel. Double-click on "Network" in the
control panel window.
Select the "Protocol" tab to start the installation of the TCP/IP protocol and click on [Add]. You
will see a list containing all available protocols. Select the "TCP/IP protocol" from the list.
The TCP/IP kernel will be installed. Once the installation has been completed you may provide the
various settings required. Please specify which PC-board should be used by the protocol.
For online configurations the subnet mask must be set to 0.0.0.0.
When connecting with WINDOWS NT the remote or the local port of the VIPA
CP143 must be set to 0. If this is not done it could take up to 30s before a new
connection is established after an existing connection has been terminated!