Specifications

Application in combination with TCP/IP CP143 H1 / TCP/IP manual
5-68 Rev. 00/07
5.11.4.5 OnNet kernel installation
The data you have noted down above will be required during the installation. You may obtain more
information on the required items by clicking on <Help>.
The installation program will only request the data required by your system.
1. Insert installation diskette (Disk 1) into drive A:. Start the Setup-program
Win 3.x: In Windows go to Run from the pull-down menu File. Enter the following:
A:\SETUP andclickon<OK>.
Win 95: From the START-menu select RUN. Enter the following: A:\SETUP andclickon
<OK>.
The installation program is started and a dialogue box will be opened. Here you can access the
latest information on the software or you may continue with the installation by means of
<CONTINUE>.
2. A window showing the licensing conditions will be displayed. Click on <ACCEPT> to
continue with the installation. Click on <EXIT> if you wish to abort the installation.
3. The program will now suggest the "Express"-installation. Please click on <CONTINUE> to
execute the "Express"-installation.
4. The next dialogue box requests the "Serial Number" and "Authentication Key" from you.
5. The next dialogue box shows a path for the installation of the software. You may change this
path as required. Click on <CONTINUE> to accept the path and continue with the installation.
6. The contents of the next dialog window depends on your system.
Win 3.x: The dialogue box lists all the drivers located on the diskette. Click on <CONTINUE>
to confirm the drivers selection.
Win 95: If the Microsoft TCP/IP-stack was installed on your system the window will indicate
this. Select FTP Software stack from this window.
7. Various windows of the installation program will be displayed to request all the information
you have noted down on the sheet above:
Network Type, IP Configuration, Name Server Configuration, Username Configuration and
Time Zone Configuration
8. Click on <CONTINUE> in the "Copy File" dialogue box. Now the program will request for the
respective diskette.
9. When the program asks whether the AUTOEXEC.BAT and CONFIG.SYS files should be
changedclickon<OK>andthenon<RESTARTSYSTEM>.
This concludes the installation and your system will be restarted.
The module is delivered with a TCP/IP test program. This is described below.