Specifications

CP143 H1 / TCP/IP manual Software
Rev. 00/07 5-41
D Termination after RESET
This is a message from the operating system. For priority 1 and 2 the connection has been
interrupted and will be re-established once the communication partner has reached the
stage that it can accommodate a new connection. In the case of priority 3 connections the
connection has been cleared but a new connection may be initiated at any time.
E Job with bootstrap function
This is a message from the operating system. The job is a READ/WRITE-PASSIV job and
can not be started from the PLC.
F Job does not exist
The selected job does not exist on the CP143 H1 / TCP/IP. This error may occur if the
SSNR/A-NR combination in the handler module is bad or when the connection module has
been omitted.