Specifications

General test functions CP143 H1 / TCP/IP manual
5-36 Rev. 00/07
5.9.3 Overall status functions
Menu item Test provides access to four sub-menus for displaying the overall status. The overall
status function returns information on all the configured connections. Up to a maximum of 10
connections can be displayed simultaneously.
Depending on the selected menu item the display will show all transport, datagram, TCP/IP or UDP
connections. The overall status display provides an option to select a connection, to monitor the
status of this connection in online mode by means of [Detail], or to display the current status of the
connection by means of [Trace].
You may also mark individual connections by means of [Sel/Desel] and display the respective status
by means of [Status].
The basic structure of the overall status display window is as follows:
Fig. 5-19: Structure overall status window
Column headings
Sel
column indicating the connection(s) that have been marked by means of [Sel/Desel].
Pos
the position of the connection in the list
SSNR
the number of the page frame that is used by the connection.
ANR
job number of the respective connection
V-Status
connection status (see table in chapter 5.9.3.1.1)
V-ID
internal connection number used by the system.