Specifications

General test functions CP143 H1 / TCP/IP manual
5-34 Rev. 00/07
Subnet-Mask
The Subnet-Mask for IP addresses. This may be entered and/or modified under Init CP Init.
Serial number
The serial number of the module. This value can not be modified.
Firmware-Version
The version number of the firmware installed on the module. This value can not be
modified.
5.9.2 Anzw Dump
The function Anzw Dump opens a window containing the indicator words between 0 and 223. The
indicator words are displayed as hexadecimal bytes.
Fig. 5-18: Output window of Anzw Dump
Please note!
The indicator word with the job no. 0 has special significance. Job no. 0 contains the current job
number that is being processed by SEND ALL or RECEIVE ALL tasks on the module.
The display is constantly updated. You can terminate the process by means of the <ESC> key.You
may then modify the page frame offset under SSNR.
A single update of the displayed values can be initiated by clicking on [update].
To restart the continuous update of the display you must click [OK].
If you press <ESC> again the window is closed.
Job-No. currently being processed
Frame offset
Job-No.