Specifications

Configuration of connections CP143 H1 / TCP/IP manual
5-26 Rev. 00/07
5.8.2 The control field of the configuration window
Fig. 5-13: Control field of a parameter configuration window
[OK]
After confirmation the new connection is accepted. You may also press the Enter key instead
of [OK].
[ESC=Escape]
The interactive window is closed and the entries are discarded. Connections that have
previously been configured are not discarded however.
[F1=Help]
Displays the help window for the current interactive window.
[Multi]
You may use this button to configure multi-connections. Multi-connections are dual
connections that share the same TSAP or the same port with another job number and a
selectable frame. The opposite job types are configured automatically.
[IndAdr]
This button provides access to the input window for indirect addressing. Here you can enter
a static area containing specifications with respect to the source and the destination for the
data as well as the indicator word.
[List]
Lists any previously configured connections for the respective protocol. This provides easy
access to any of your connections for checking and revising. You may also edit configured
multi-connections.