Specifications

CP143 H1 / TCP/IP manual Software
Rev. 00/07 5-25
5.8 Configuration of connections
New configurations require that an initialization is performed. (see chapter 5.6). The initialization
determines the station that must be configured.
The CP143 H1 / TCP/IP module is compatible with four types of communication connection:
• H1-transport connections
• H1-datagram connections
• TCP-connections
• UDP-connections
The configuration of H1-connections and TCP/IP-connections differs in the specification of the
ethernet address and TSAPs (for H1) or the IP-address and ports (for TCP/IP).
5.8.1 Structure of the configuration windows
The structure of the configuration windows that you can access under Connections is nearly
identical:
Fig. 5-12: Structure of configuration windows
• General connection data
Here you may enter general data for connections that are used with both, H1 and TCP/IP.
General connection data consists of:
Connection name, frame offset, job number and if required, type of job
• Type of jobs
this is where you configure the job types like SEND, RECEIVE, FETCH and WRITE
• Protocol related area
Here you must enter the protocol related data, i.e. the ethernet address and the TSAP for
H1 and the IP-address and the port for TCP/IP.
• Control field
The control field is used to navigate within the interactive window. The program provides
the control field shown in Fig. 5-13 to manipulate the configuration window. You may use
the mouse or the cursor keys to page through your connections.
General
connection data
Job types
Protocol related
area
(here TCP/IP)
Control field
Main manu
File name of the
connection file