Specifications

CP143 H1 / TCP/IP manual Software
Rev. 00/07 5-23
5.7.8 Test functions for the clock
The test functions for the clock are for use in online mode. You must specify parameters for online
transfers using the Online function located under Init (see chapter 5.6.2).
The test functions for the clock are available via the menu item Test.
The mask for clock test functions of the respective CP143 module provides options for setting or
reading the clock.
When you select this function a read message for is issued to the clock of the currently selected CP.
This CP returns a timing message containing the current time. The returned values are displayed by
means of the following window:
Fig. 5-11: Dialog window for the test functions for the clock
Parameters
day of week
The program calculates the day of the week from the date. This value can not be modified.
current date
Current date
You can modify this value and it is transferred to the CP when you select "set".
24 hour mode
You can select between 24- or 12 hour mode.
You can modify this value and it is transferred to the CP when you select "set".