Product manual

IP 266 Index
Forward (FWD) 6-65, 7-3, 7-5
Frame 7-1
FUM 2-10, 2-15
- Signal 8-6
Function 5-23
- 1 (L) 6-45, 6-47
- 2 (G) 6-45, 6-47
- 3 (X) 6-45, 6-47
- 4 (F) 6-45, 6-47
- 5 (M) 6-45, 6-47
- Hardware limit switch 8-15
FUNCTION SELECT
- Menu 6-12, 6-70
- Screen form 6-12, 6-70
Function signal FUM
G
G function 5-72
G00: Rapid traverse 5-73
G04: Dwell 5-73
G10: Flying change 5-73, 5-76
G20: End of loop 5-77
G24: Start of loop 5-77
G25: Approach target
over shortest path 5-78
G26: Approach target in
clockwise direction 5-78, 5-79
G27: Approach target in
counter-clockwise direction 5-78, 5-79
G40: Disable tool offset 5-79, 5-81
G43: Enable positive tool offset 5-79, 5-81
G44: Enable negative tool offset 5-79, 5-81
G53: Cancel zero offsets 5-83, 5-85
G54 - G57: Enable offset 1 - 4 5-83, 5-85
G70: Dimensions in 0.1 inches 5-87
G71: Dimensions in mm 5-87
G74: Approach to reference
point 5-88
G90: Absolute position
specifications 5-89
G91: Relative position
specifications 5-89
Generation date 6-9, 6-51, 6-53
Ground wire 8-6
Grounded shield 8-6
H
Hardware
- Configuration 2-1
- Fault 2-22
Hardware limit switch 1-4, 2-10,
2-11, 3-1, 8-1
- End 8-7
- Polarity 2-11, 5-20,
6-34, 6-35
- Start 8-7
- Testing 8-15
Header 6-4, 6-5
- Field contents 6-5
Help
- Menu 6-66, 6-67
- Function 5-90
Hierarchical structure 6-56
- COM 266 6-14
- TEST form 6-56
I
IM 511 error
- Programmer 10-2
Inch 5-4
Increment mode 8-18
Increment mode absolute 5-38, 5-40
- Functions 5-40
- Key menu 6-4, 6-7
- Keys <F1> to <F6> 6-65
- Linear axis 5-38
- Rotary axis 5-39
EWA 4NEB 812 6057-02 5