Product manual

IP 266 Start-Up
Teach-In
Select mode 10 ("Teach-in on").
Specify a program number.
Start mode 10.
Return info: Teach-in: on
ok
Approach various positions and store them with "Transfer".
Start mode 11 ("Teach-in off").
Execute the program you generated in "Teach-in" mode. Supplement the
program in DIN or Text mode by adding
dwells,
loops,
programmed stop,
speed changes and the like.
Familiarize yourself with the following modes
• Zero offset absolute (mode 12)
ok
• Zero offset relative (mode 13)
ok
• Clear zero offset (mode 14)
ok
• Tool offset (mode 15)
ok
• Tool offset off (mode 16)
ok
• Acknowledge error (mode 17)
ok
EWA 4NEB 812 6057-02 8-19