Product manual

Start-Up IP 266
All speeds must be lower than V
max
1 to 65000
mm
/
min
1 to 65000
mm
/
min
fwd./rev.
1 to 65000
pulses
/
rev.
0.001 to 400.000 mm
yes, no
pos/neg
1000
mm
/
min
500
mm
/
min
fwd.
1000
pulses
/
rev.
5.000 mm
no
neg
Reference point approach speed 1
Reference point approach speed 2
Reference direction
Pulses/revolution
Distance/revolution
PLC BCD-coded
Polarity HW limit switch
Reference point coordinate
Software start limit switch
Software end limit switch
Tool length offset
± 32767.999 mm
± 32767.999 mm
± 32767.999 mm
± 32767.999 mm
0.000 mm
-400.000 mm
400.000 mm
0.000 mm
For a rotary axis, the two fields for the software limit switches are replaced by the two fields
start of traversing range and
end of traversing range.
The range limits are identical to those for a linear axis.
Maximum speed
Jog speed 1 fwd.
Jog speed 1 rev.
Jog speed 2 fwd.
Jog speed 2 rev.
Incremental speed
Zero offset 1
Zero offset 2
Zero offset 3
Zero offset 4
Limits ExampleMachine data item
10.000 mm
25.000 mm
30.000 mm
35.000 mm
± 32767.999 mm
± 32767.999 mm
± 32767.999 mm
± 32767.999 mm
15000
mm
/
min
2000
mm
/
min
2000
mm
/
min
4000
mm
/
min
4000
mm
/
min
12000
mm
/
min
1 to 65000
mm
/
min
1 to 65000
mm
/
min
1 to 65000
mm
/
min
1 to 65000
mm
/
min
1 to 65000
mm
/
min
1 to 65000
mm
/
min
8-10 EWA 4NEB 812 6057-02