Product manual

IP 266 Fundamentals of COM 266
The structure of each "OUTPUT" form is identical to that of the corresponding
"INPUT" form; the only difference is the name of the form shown in the header.
The data display begins when you have pressed <F1>, <F2> or <F3>.
• Output machine data
The seven screen form pages of machine data are displayed when you
entered MACHINEDATA in the 'Data Block' field or selected MACHINEDATA
with <F7>.
The data on each screen page is identical to that on the corresponding page
of the "INPUT MACHINEDATA" form. All fields are input fields, i. e. the data
in these fields can be overwritten. You can store and print out your new data.
• Output traversing (machining) program
You can display your traversing (machining) program by entering
MACHINING PROGRAM in the 'Data Block' field or by selecting MACHINING
PROGRAM with <F7>. You can edit the program and store any changes
made.
EWA 4NEB 812 6057-02 6-69