Product manual

IP 266 Fundamentals of COM 266
Source DestinationField
Select one of the following with <F7>:
• Module/IP 266
• Programmer/PG
• Disk drive/FD
The next selection is displayed each time you press <F7>.
Device:
Drive: If the DEVICE is a floppy disk or hard
disk, you will be prompted to specify
the drive. Make the appropriate
selection with <F7>.
The drive identifier is taken from the
"PRESETS" form, and cannot be
changed.
The "Plant code", "Developer" and "Generation date" fields are updated in
accordance with the file selected.
The name specified in the "PRESETS"
form is displayed as filename, and
cannot be changed.
If you selected a drive, you must enter
the filename in this field. Select a file
from the list of files on the relevant
drive with <F7>. "Data block missing"
is displayed if no file is available.
Filename:
Plant code
Developer
Generation
date
The source data block is displayed as
default. You may change this number.
Enter the number of the data block you
want to transfer.
The DB no. of the destination device is
irrelevant.
An asterisk (*) in this input field
automatically selects all "traversing
(machining) program" DBs.
"*" is also allowed for transferring
machine data from FD to FD.
DB No.:
EWA 4NEB 812 6057-02 6-53