Product manual

IP 266 Fundamentals of COM 266
Function key menu:
<F4> Press this key to start the printout.
The following message is displayed on the error line while printing is
in progress:
FEC Printing ...
When the printer stops, you will see the message:
FEE Printed!
<F8> This key has two functions.
While a printout is being made, you can abort it by pressing this key.
When you do so, "Abort printing (Y/N) ?" is displayed on the error line.
You must either confirm the abort request by entering Y or revoke it by
entering N.
If you press this key when the printer has stopped, you immediately exit
the Print menu.
A machine data printout has the following layout:
Figure 6-17. Machine Data Printout
Maximum deceleration : 500 [mm/sec ] (10...9999)
Acceleration fwd : 200 [mm/sec ] (10...9999)
...
...
...
Incremental speed : 1000 [mm/min] (10...9999)
Siemens AG Printout Date 16.11.90
Simatic S5 Machinedata Page 1
COM 266 - IP 266 LINEAR AXIS Meier
Machinedata Source DB no. Module Dimensional unit
LINEAR FD 1 11 mm
EWA 4NEB 812 6057-02 6-39