Product manual

Fundamentals of COM 266 IP 266

Data area (continued)

"Type" column: I = input field, O = output field

Field name

Max. following

error

Type

Description

Maximum difference between the setpoint position and the actual

position during traversing (machining) under closed-loop control. The

maximum following error must be equal to or greater than the

tolerance range of the standstill (zero-speed) monitor.

Following error

monitoring

I You can disable monitoring of the following error by entering "off" in

this field or selecting "off" with <F7>. The default is "on".

Standstill

monitor

I Maximum difference between the setpoint position and the actual

position when the position controller is active. This value must be

greater than zero and less than the maximum following error.

Function key menu:

The function key menu is the same as that on page 1 of "INPUT MACHINEDATA".

You can use <F7> to select the appropriate value for the "Encoder type", "IP-

STOP if CPU-STOP" and "Following error monitoring" fields.

And what now?

Fill in all fields on this screen page. An input field for which there is no default

can be exited only after an entry has been made.

Press <F1> to screen page 4 of "INPUT MACHINEDATA".

6-26

EWA 4NEB 812 6057-02