Product manual

Fundamentals of COM 266 IP 266
And what now?
Position the cursor to the "Data Block" field.
Select MACHINEDATA using <F7>.
Using the cursor control keys, move the cursor to the "Block No." field. Enter
there the number of the data block. Enter "1" in this field.
Choose your data destination with <F1>, <F2> or <F3>.
<F3>, for instance, selects FD as data destination.
Press <F1> to choose the IP 266 as data destination.
Note:
If you have not installed an IP 266, your data destination must be either a disk
drive or the programmer.
The first page of the "INPUT MACHINEDATA" form is displayed on your
monitor screen.
6-18 EWA 4NEB 812 6057-02