Product manual

IP 266 Machine Data, Modes and Traversing Programs
Example:
Generating a new traversing program in "Teach-in" mode:
The table below lists the actions you must take. Start at the top of the table and
work down. The entries in the "Axis status" column indicate the state of the axis
after the relevant key has been pressed.
Table 5-13. Generating a New Traversing Program in Mode 10
Mode
and
parameters
Press function
key for
Effect Axis
status
Axis
position
Mode 10
Prog. no. 7
Start Program 7 is generated on the
module
Stopped Arbitrary
Mode 1
Override 20%
Forward Move axis forward at 20% of jog
speed 1
Travers-
ing
Variable in
accordance
with movement
Mode 1
Override 50%
Exec Change the speed to 50% of jog
speed 1
Travers-
ing
Variable
Mode 1 Stop Decelerate
Zero speed
Travers-
ing
Stopped
Variable
E. g.
1258.250 mm
Mode 1 Exec Stopped 1258.250 mm
Mode 6
Abs. target
pos.
3000 mm
Start Move to absolute target position
Decelerate at position 3000 mm
Travers-
ing
Stopped
Variable
3000 mm
Mode 6 Exec Stopped 3000 mm
Store as block
N01 X1258.250 F2500
Store as block 2
N02 X3000 F2500
EWA 4NEB 812 6057-02 5-49