Smoke Alarm User Manual

Configuring image parameters
11 Configuring image parameters
11.1 Configuring general image parameters
1. Call up the device homepage. See section 9.1: Calling up the device homepage.
2. Select Image parameters in the Configuration menu.
 The Image parameters dialogue window opens:
3. Enter the desired settings in this dialogue window.
Brightness Live video image brightness (0% to 100%)
Contrast Live video image contrast (0% to 100%)
Saturation Live video image saturation (0% to 100%)
Flip picture Activate the check box to rotate the image through 180 degrees (the image now
appears upside down).
4. Click on Save.
11.2 Configuring text overlay
1. Call up the device homepage. See section 9.1: Calling up the device homepage.
2. Select Image parameters in the Configuration menu.
 The Image parameters dialogue window opens:
3. Enter the desired settings in this dialogue window.
Name Enter a name for the video source here. This is the name that will be
overlaid on the live video image if you have activated the appropriate
setting.
24
Siemens Building Technologies
Fire Safety & Security Products