Installation guide

USB input/output modules

Siemens Building Technologies

Fire Safety & Security Products 08.2007

Abb. 18 USB output module

1 Relay outputs

2 Output status LED

3 Module addressing

4 Configuration status LED

5 USB port

NOTE

The cables can be connected in any way as the outputs are no-voltage connections.

USB Output Module

max. 30V

Abb. 19 Connection of USB output module

11.2.3 Connecting USB input and output module USBOPTOREL16

1. Connect the module via a plug-type terminal strip.

2. Assign the module address. See Section 11.3: Module addressing.

3. Connect the module to the USB interface.

Î The operating system detects the USB modules and automatically activates

the drivers.

NOTE

In case a message is displayed, click OK until all dialog boxes are closed.

Î The new hardware will be displayed as a QuickInfo.

Î Each input/output is assigned an LED indicating the current status.